1310nm 10km DOM LC SMF QSFP28 Optical Transceiver Module For Data Cent
Alcatel-Lucent 3HE10550AA Compatible QSFP28 1310nm 10km DOM LC SMF Optical Transceiver Module for Data Center
Functional Description
Olinkcom’s 100G QSFP28 LR4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control 4- Distributed Feedback Laser (DFB) with center wavelength of 1296 nm, 1300nm,1305nm and 1309 nm. The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a PIN photo-detector and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and MDIO management interface.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA) and compliant to IEEE 802.3bm.
Optical Characteristics (Top=0~70℃, Vcc=3.14~3.47V)
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Transmitter |
| Signaling rate, each lane | | Gb/s | 25.78125 ±100 ppm | 1 |
| Four Lane Wavelength Range | λ1 | nm | 1294.53 | 1295.56 | 1296.59 | |
| λ2 | 1299.02 | 1300.05 | 1301.09 | |
| λ3 | 1303.54 | 1304.58 | 1305.63 | |
| λ4 | 1308.09 | 1309.14 | 1310.19 | |
| Total launch power | Pout | dBm | | | 10.5 | |
| Average launch power, each lane | Pavg | dBm | -4.5 | | 4.5 | 2,7 |
| Optical modulation amplitude, each lane (OMA) | OMA | dBm | -1.3 | | 4.5 | |
| Extinction ratio | ER | dB | 4 | | | |
| Side-mode suppression ratio | SMSR | dB | 30 | | | |
| Average launch power of OFF transmitter, per lane | POFF | dBm | | | -30 | |
| Optical return loss tolerance | | dB | | | 20 | |
| Transmitter reflectance | | dB | | | –12 | |
| Transmitter eye mask {X1, X2, X3, Y1, Y2, Y3} | | | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | 3 |
| Receiver |
| Receive Rate for Each Lane | | Gb/s | 25.78125 ±100 ppm | 4 |
| Four Lane Wavelength Range | λ1 | nm | 1294.53 | 1295.56 | 1296.59 | |
| λ2 | 1299.02 | 1300.05 | 1301.09 | |
| λ3 | 1303.54 | 1304.58 | 1305.63 | |
| λ4 | 1308.09 | 1309.14 | 1310.19 | |
| Overload Input Optical Power | Pmax | dBm | 5.5 | | | |
| Average Receive Power for Each Lane | Pin | dBm | -10.6 | | 4.5 | 5,7 |
| Receiver Sensitivity(OMA)per lane | Psens1 | dBm | | | -11.3 | |
| Stressed Sensitivity(OMA) per lane | Psens2 | dBm | | | -6.8 | 6 |
| Return Loss | RL | dB | -26 | | | |
| Receiver Electrical 3dB upper cutoff frequency, per lane | | GHz | | | 31 | |
| Los De-Assert | Pd | dBm | | | -11.6 | |
| Los Assert | Pa | dBm | -23.6 | | | |
| Loss Hysteresis | Pd-Pa | dBm | | 2 | | |
Product Features
● Duplex LC receptacle optical interface
● Single +3.3V power supply
● Hot-pluggable QSFP28 MSA form factor
● 4x25G Electrical Serial Interface
● Compliant with 4x28G(CEI-28G-VSR)
● AC coupling of CML signals
● Transmitter: cooled 4x25Gb/s LAN WDM DML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
● Receiver: 4x25Gb/s PIN ROSA
● Low power dissipation(Max:3.5W)
● Built in digital diagnostic function
● Operating case temperature range:0℃ to 70℃
● Compliant with 100GBASE-LR4
● I2C Communication Interface
Applications
● 100GBASE-LR4
● Infiniband QDR and DDR interconnects
● 100G Datacom connections
Ordering Information
| Part Number | Description |
| OLSQXXTXL-CD10 | QSFP28 LR4 10km, 0~70℃, with Digital Diagnostic Monitor |
Product Tags:
|
|
1310nm 10km DOM LC SMF QSFP28 Optical Transceiver Module For Data Cent Images
|
